Performance in Lighting
 
Prisma  



Steel Duplex


¬ Series of Class III inground luminaires.
¬ Self extinguishing technopolymer housing.
¬ Clear tempered glass lens.
¬ Sand cast stainless steel faceplate.
¬ Silicone gasket seal.
¬ Stainless steel hardware.
¬ Each luminaire is supplied with two + two IP67 (submersible wet rating) cable clamps, allowing for through wiring.
¬ Steel Duplex is available with 9+9 LED’s with a 12V direct current supply, or with 1+1 high power LED with a stabilized 350mA direct current supply, installed by direct connection to the line without interruption of the secondary circuit.
¬ RGB power versions are available upon request.
¬ Steel Duplex is pre-set for individual or continuous line power supply.
¬ The luminaires are assembled by joining the pre-wired housings and the corresponding recessed fixing kits.



from the series:  Steel Duplex

Steel Duplex


Steel Duplex
Code Base Wattage Voltage Water Protection UL IP Finish
075300   n.9+9 led 120° 1,5 W 12V WL 67 Stainless steel/white LED
075302   n.9+9 led 120° 1,5 W 12V WL 67 Stainless steel/blue LED
075304   n.1+1 led 6° 3,2 W 350mA WL 67 Stainless steel/white LED
075306   n.1+1 led 6° 3,2 W 350mA WL 67 Stainless steel/blue LED
075308   n.1+1 led 45° 3,2 W 350mA WL 67 Stainless steel/white LED
075410   n.1+1 led 45° 3,2 W 350mA WL 67 Stainless steel/blue LED

Accessories


¬ Single recessed fixing kit (for steel Square and Visa), and double recessed fixing kit (for Steel Duplex) in self extinguishing techno polymer.
¬ IP67 (temporary submersion wet rating) recessing box with 10W safety transformer, 12V DC stabilized output current. (to be installed in a protected area)
¬ IP67 (temporary submersion wet rating) recessing box with 18W safety transformer, 350mA DC stabilized output current. (to be installed in a protected area)

Code Description

Finish

7352 Box IP67 10w LED converter 12V DC (100-265)  
7354 Box IP67 18w LED converter 350mA DC  
7355 Box IP67 4w LED converter 350mA DC  
351 Double recessed fixing kit