CycloBat 16

¬ In-ground luminaire for landscape, pathway and walkway lighting. The luminaire is fully adjustable up to 360° horizontal rotation after installation. Available in 8.2”, 10.5” and 12.9” diameter.
¬ Self extinguishing (V2 rated), injection molded polypropylene rough-in housing to house the luminaire. Includes a die-cast anodized aluminum, 24 cu. in. integral junction box, secured and sealed against water intrusion to the bottom of the rough-in with two 1/2” NPT openings for feed through wiring.
¬ Luminaire housing is stainless steel AISI 304, dark gray satin finish.
¬ Precision die cast, copper free aluminum faceplate, 0.15” thick. Conforms to ASTM A413.2. Polished natural aluminum or black anodized finish.
¬ Retaining ring is stainless steel AlSI 304, dark gray satin finish, 0.1” thick.
¬ Molded soda lime glass diffuser, 0.2” thick, resistant to thermal shocks.
¬ The diffuser is held in place by the retaining ring, which is secured by six stainless steel set screws.
¬ One-piece molded silicone gasket seals out water and dust.
¬ Aluminum upper and lower sections separated by aluminum spacers. The lower section houses the electrical gear while the upper one sustains the optical compartment. Aluminum reflector. Grounded internally.
¬ All Cyclobat 23 and 30 models have a +/- 25° adjustable lamp reflector tilt, secured by two Philips head screws to maintain aiming during relamping. Full 360° horizontal rotation.
¬ The luminaire is factory wired with 24” of #18-3 AWG SJEOW cord. The cord is sufficient to allow the luminaire housing to be removed from the rough-in housing for inspection, cleaning or relamping .
¬ The cord ends are factory sealed with resin compound to the luminaires housing and to the junction box cover. The cast aluminum junction box cover includes an O-ring gasket to ensure water tightness. Wire is resin glued to the cover to create a siphon barrier.
¬ UL and cUL listed for wet location, IP67: suitable for temporary submersion. Suitable for in-ground and concrete mount.
¬ ADA compliant.